SHOWER SUMP SYSTEM UNIT LSU600 12V
R1,825
Designed especially for use on boats with built-in sink, shower or tub, the LSU600 will pump all water out of the drain and into the tank. It is compact and can be mounted either against the floor or against the walls, in which case the two legs can be cut off. *N*
- Description
- SPECIFICATIONS
- IN THE BOX
- Shipping
- Product QR Code
Description
It has a built-in automatic bilge pump that will start operating as soon as the float switch senses water. Additionally, it features a filter, which can be easily serviced by removing the top transparent cover and a non-return valve at the outlet hose.
The LSU600 case is made of resistant polypropylene and the lid from acrylic. Its power consumption is limited to 1,8A at 12V. The LSU 600 System has 3 inlet hoses (2 of 19,1mm) and 1 of 25,4mm) and 1 outlet hose with non-return valve for hose of 19,1) and 25,4mm) in diameter.
The lid has a brown protective sleeve on both sides which can be removed on installation. The lid will then be clear with a slight tinted effect.
Polypropylene plastic case x 1
Acrylic lid x 1
Auto bilge pump 600GPH x 1
Outlet x 1
Screws x 6
Fixing clamp x 1
O-Ring x 2 (two different sizes)
Non-return valve x 1
Plastic net filtration x 1
Warning label x 1
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 22 × 21 × 11 cm |
