DIRT TRAP / GUD FILTER 25mm
R1,470
The GUD CF1000 fuel filter assembly is designed to act as a first-stage diesel filter and water separator for bulk storage tanks. The unit features a cast-aluminium head and a clear plastic bowl to allow for easy inspection of the fuel. It comes equipped with a specifically shaped black spanner wrench used to tighten or loosen the bowl from the head. *S*
- Description
- in the box
- Shipping
- Product QR Code
Description
Fuel filters serve a vital function in today’s modern, tight-tolerance engine fuel systems. Unfiltered fuel may contain several kinds of contaminants, such as paint chips and dirt that has been knocked into the tank while filling, or rust caused by moisture in a steel tank. If these substances are not removed before the fuel enters the fuel injectors, they will cause rapid wear and failure of the fuel pump and injectors. This is due to the abrasive action of the particles on the high-precision components used in modern injection systems. Fuel filters also improve performance, as the fewer contaminants present in the fuel, the more efficiently it can be burnt.
Diesel filters also remove the moisture from the diesel to prevent poor fuel burn, reduced power and protection against corrosion of metal components. Diesel fuel filters are available in spin-on water separator and multi-port types in addition to spin-on, cartridge, metal-free and wrap.
Features:
– BSP tapped inlet and outlet ports.
– Direction of flow marked on head.
– Cast-aluminium head, plastic bowl ribbed for strength and grip.
– Designed to operate at only 20 kPa pressure, with approximately 40 litres per minute flow rate.
GUD Filter / Dirt Trap 25mm x 1
Spanner Wrench x 1
Additional information
| Weight | 2 kg |
|---|---|
| Dimensions | 30 × 14 × 14 cm |
