MAXI MACERATOR PUMP 12V
R3,315
Bronze macerator and rubber impeller discharge pump. Macerates and discharge waste and waste mixtures. These macerator pumps are suitable to empty marine holding tanks when not in a discharge restricted area. *D*
- Description
- Specifications
- in the box
- Shipping
- Product QR Code
Description
The pump is self-priming up to a 6′ lift when impeller is wet or 4′ if it is dry, and may be mounted in any convenient point in the waste discharge system. The macerator section grinds waste down to a very small particle size, so that it can be easily pumped through a 1’ ID discharge hose. The brass pump section is self-priming and this allows the unit to be mounted above the tank in any convenient location (for an excellent efficiency, provide for pump location as close to holding tank as possible). It will take less than 3 minutes for the macerator to pump down a typical 114 litre holding tank. This pump will not handle hard solid objects, sanitary napkins or rags. Self priming up to 0.6 mt vertical lift. 43lpm output at 3 mt. total head.
Capacity: 43 lt./ min
Amp Draw: 12A voltage 12V
Dimension: 240 x 130 x 90mm
Voltage: 12V / 12A
Inlet Connector: 1½ ” (38 mm)
Outlet Connector: 1″ (25 mm)
Maxi Macerator Pump x 1
Additional information
| Weight | 3 kg |
|---|---|
| Dimensions | 27 × 13 × 10 cm |
